need4speed Posted December 24, 2013 Share Posted December 24, 2013 When making this up, would i be correct in thinking that i dont need to solder wires from pins 3,4,5,and 6 of the DB37 connectors? Im sure i read somewhere that these were only required if running MS2? Or is there another reason i should include them anyway? Quote Link to comment Share on other sites More sharing options...
ANTOINE Posted December 24, 2013 Share Posted December 24, 2013 I think you have true, but me , i have prefer solder them on an another plug to have option for later wait master's answer to, it's better ; ) Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted December 30, 2013 Share Posted December 30, 2013 They're not used (spare pins) but as Antione says, no harm in adding small wires (0.5mm goes on easy) for future. Quote Link to comment Share on other sites More sharing options...
need4speed Posted December 30, 2013 Author Share Posted December 30, 2013 Cheers. Think i'll add them as suggested Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.