mzs Posted June 22, 2014 Share Posted June 22, 2014 Hi,I started to make a switchable "emergency reserve" ECU from a NNN500020 for our trips.I will change the 29f200 to 29f800 and put 4 different softwares for 4 different model (EU2 Defender, EU2 Disco, EU3 Defender, EU3 Disco) to the switchable 4 banks.I have the EU3 dumps for Defender and Disco, but didn't find any EU2 softwares.For the project I need full 29f200 dumps (with the full software content, not only the maps)for Defender: NNW501350 / STHLE 022 STTLP 010 (or NNW501340 / STHLE 022 STTLP 010)and for Discovery: possible dump of NNW501240 / STHDE 021 STTDP 010 (or NNW501270 / STHDR 009 STTDP 010)Any help is greatly appreciated.Thanks in advance,mzs Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted June 22, 2014 Share Posted June 22, 2014 I'd also be interested in the full dumps for a little analysis to feed my curiosity if anyone has them Quote Link to comment Share on other sites More sharing options...
steve200TDi Posted June 22, 2014 Share Posted June 22, 2014 Yes, I have a '99 TD5 and understand that I need an EU2 map to put on my NNN ECU for it to run as an EU3 wont work! Steve Quote Link to comment Share on other sites More sharing options...
mzs Posted June 25, 2014 Author Share Posted June 25, 2014 Yes, I have a '99 TD5 and understand that I need an EU2 map to put on my NNN ECU for it to run as an EU3 wont work! Steve Yes. With EU3 software the EU2 engine will not crank, the MIL is on, and the fuel pump will not work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.