eddyoz Posted July 19, 2014 Share Posted July 19, 2014 The injector pump has diesel dripping from the 6mm allen screw just behind the mounting flange.Before loosening the screw,I have tried to find out what could be lurking behind it spring,valve etc.Other VE pumps do not appear to have this screw.Does anyone know what its purpose is?Could it be just a case of renewing an O ring or fibre washer? Quote Link to comment Share on other sites More sharing options...
Eightpot Posted July 19, 2014 Share Posted July 19, 2014 It's a cover screw to allow access to insert a pin to lock the shaft in place. Nothing springy will fly out Quote Link to comment Share on other sites More sharing options...
vulcan bomber Posted July 19, 2014 Share Posted July 19, 2014 its just a screw in cover, new O ring or coper washer and job should be a goodun. Quote Link to comment Share on other sites More sharing options...
eddyoz Posted July 20, 2014 Author Share Posted July 20, 2014 Many thanks.The O ring had gone hard and split,fixed temporary with a skinny O ring,hope to get the proper fitting one next week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.