matfield Posted February 1, 2016 Share Posted February 1, 2016 Hi Guys, I'm looking for measurements for the exhaust manifold/turbo flange, the distance between the three bolt holes/studs. Thanks Mat Quote Link to comment Share on other sites More sharing options...
steve200TDi Posted February 2, 2016 Share Posted February 2, 2016 Hi Mat, Assuming they are all equal as I've only measured between 2 studs it's 81mm. I've removed it before and don't recall having to put the gasket on a correct way. Hope this helps Steve Quote Link to comment Share on other sites More sharing options...
Pawl12 Posted February 3, 2016 Share Posted February 3, 2016 If its the same as the td5 in a Disco, the stud pattern on the exhaust manifold side is NOT equi spaced It is ewui spaced on outlet side. I'll post a photo a spare gasket later with dims. If your are in a hurry have a look on the brit-car website for the gasket. Quote Link to comment Share on other sites More sharing options...
steve200TDi Posted February 3, 2016 Share Posted February 3, 2016 Hi Mat, Assuming they are all equal as I've only measured between 2 studs it's 81mm. I've removed it before and don't recall having to put the gasket on a correct way. Hope this helps Steve Eeek, sorry these measurements are for the turbo to downpipe! Oh well, you have these too! Steve Quote Link to comment Share on other sites More sharing options...
Pawl12 Posted February 3, 2016 Share Posted February 3, 2016 Here's a photo of a gasket with dims for the holes (Hole dia is 9mm) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.