mikeyb13 Posted July 31, 2016 Share Posted July 31, 2016 I have been doing a 3.9 v8 conversion on my f reg 90. I have a long stick lt77 from a v8 but when ive gone to fit the engine it seems the input shaft is too long does this mean I have the wrong box or will I need a conversion plate? Quote Link to comment Share on other sites More sharing options...
stephencdavies Posted August 1, 2016 Share Posted August 1, 2016 you might have to use the v8 bell housing. i know the old v8s fitted on to the lt77 so long as the housing was swapped. not completely sure about your v8 though. Quote Link to comment Share on other sites More sharing options...
mikeyb13 Posted August 5, 2016 Author Share Posted August 5, 2016 It's as if the bell housing is too short or the shaft is 30mm too long Quote Link to comment Share on other sites More sharing options...
miketomcat Posted August 5, 2016 Share Posted August 5, 2016 Check you have the right spigot bush for you gearbox. I know diesel lt77 (disco) is a different size to the v8. Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.