SCHREIBER

Is a weigh bridge something most farms have? Thanks Chris

Where would you have to go, to weigh your landy? I'd be interested to see how much mine weighs. Cheers Chris

I only need to know the measurment between the mounting holes and the new shock mounting hole in the shock mount(the one that gives most articulation on your mounts) Cheers Chris

If the injector is not sealing properly, it wouldn't leak oil;)

Could you measure them, and PM me, when you have them please? Cheers Chris

Has anyone got a pair of these they can measure the distance between the original bolt holes and the new shock mounting hole, as unfortunatly gwyn's mounts won't fit my 90, as they would sit proud, ontop of my roll cage mount so I'm going to have to weld some 6mm plate to the chassis instead. Chris

Just a quick one, do gwyn lewis rear challenge shock raise the mounting of the shock by 2" like his front ones? Thanks Chris

Thanks again for the help, heres a pic of the exhaust I've made. Cheers Chris:)

Picked them up today, yes there is lots of nuts and bolts Hopefully have them fitted this weekend

Thanks for the replies. I've got a set of the QT whhel arches being delivered tommorow(hopefully ) Thanks Chris

They won't fit as I've chopped the rear corners of the tub off, but thanks for the link anyway:) Chris

I've got 37-12.50-13 creepy crawlers on my 200tdi 90, and they stick out a fair way, and with the MOT nneding to be put on, I need to srot something out. I've built a new rear crossmember that has raised sides up to the top of the wheel arch, and cut off the bottom corners of the tub. I like the QT arches that are made of rubber and follow the line of the wheel arch, and I could also follow the line of my new wheel arch on the tub, but they seem quite expensive at 200 odd quid. Does anyone have any other ideas? What have others done? Thanks in advance Chris

Thanks for the replies lads I've managed to get a piece of 3" stainless tube, that is bent to pretty much the right shape for running the exhaust out behindthe passenger door, just in front of the wheel arch, so I'm gonna put the exhaust there. Thanks again Chris

I'm moving my exhaust on my 90 because the roll cage mount is in the way of the side exit I had already. I'm building my 90 to use in challenge events, but I want to run my exhaust up behind the cab. Would this be OK for challenge event rules/regs? Thanks Chris

Just thaught i'd post a pic of the rear crossmember I've made over the last few days. Its based on a winch tray from Devon4x4. Chris

How have people mounted the front hoop of the roll cage on a 90/110 to the bulkhead outriggers? Thanks Chris

Quick question... How come LLama4x4 don't recomend fitting their hydro assist kit to defnders that get used on the road? Is it dangerous? Ta, Chris:)

Can't belive I didn't see that Ta mate chris:)

I would like to start to compete in challenge events in my 90 next year. Do I NEED diff lockers to do challenges or are there differnt classes for differnet mods? Atm I'm running 37" creepy crawlers, on my 200tdi 90, so there would have to be no tyre height restrictions on any events I do? What other equipment would I need to enter events, I presume a winch is a must? Also what events do yu rekon would be good starter events for me? Thanks in anticipation Chris P.S I live in dorset.