MogLite
-
Posts
1,277 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by MogLite
-
-
I saw PEN15 on a 500SEC Merc many years ago at the Ally Pally when the motor-cycle show was on, seems one of the GP riders had it at the time.
I've just bought D15ESL - as a lot of people cant spell diesel, its a bit of fun - D13SEL was about £30K more !!
Just debating to get P30TRL for the Rangie !!
-
Cheers Nick - just had the guard off, and the motor and pump seem to turn freely.
I took that box on top of the motor apart, and the little breaker switch is melted and burned up - proper job.
Short-circuiting that switch, and it springs back into life
I guess I'll just replace the switch/breaker and see how it goes.
-
My Clarke compressor has packed up 1/2 way through a rustproofing job
Its one of these and has been giving sterling service for a couple of years.
On top of the motor is some kind of overload protection, its got a 16A switch/breaker on it.
This tripped out a couple of time yesterday, I let it cool, and carried on. The there was a plume of smoke from that box, and the compressor was no more.
Do I need a new motor, or can that bit be repaired separately ?
Or is it a sign of a bigger problem
I'm not using a motor starter, should I be ? Its just plumbed into a 16A feed from the house at the moment.
Thanks All
-
I've just bought shares in Bumpkin Electric Co
Best you get lots of 50p's for your meter - you'll be needing them
-
Ali
You are in the same boat as me, and are finding the same thing.
Land Rover don't do a decent LWB family car - well not until you get to the Disco 3 anyway.
Diesel p38a would come close, but there isn't that much boot space compare to a 110.
As for the Nissan, they are in the UK - Outlanders or something like that. They look pretty chunky. But I guess they share the same self destruct engine as the Navaro. There is a thread here about it - BullBar CowBoy may have started it.
What you need is a nice little Izusu Trooper Holden Jackaroo
-
This is my old trolley jack, but this wonderful piece of bodgery still gets plenty of use with the Clarke jack - I've got a 2nd longer one, but that does get a little outta control with 2 tonnes on it
-
I've got that exact one - had it for 2-3 years - its great. Its not too heavy to lift/move. I had a 3 tonne previously and that was a bit of a monster.
If you are in the habit of lifting a tall Land Rover via the chassis - you'll run out of lift, but under the axles is fine.
-
I had a stainless snorkel on my Ibex, it let in condensation sometimes. Would that be a problem for your application ?
-
I think I may have found the solution in an overdrive unit designed for the NV gearbox... I'm investigating.
It it this one 0.58:1 double overdrive
-
Jules
I've got a little oxy-propane kit that uses the same cylinders. It certainly works well, but its a good job you are close to Hellfrauds, as it eats gas cylinders, so its expensive to run.
No idea on the magic sticks though
Andy
-
Have you ever considered that your possibly just a F touch 'Barking' ?
Have you ever considered that your possibly just a F touch 'Barking' heavy
?Top work fella but maybe you need to run around a bit, and let Kim the racing snake onboard <LOL>
-
You'll be needing a Black & Decker Powerfile
Works a treat, just dont use them side-side, cause then the belts fall off.
Andy
-
This is better then televison - go Team HOFS B)
-
and this is a quality thread how ?
A generic motoring question, that revolves around not being able to read a form.
The vehicle being taxed, may or may not have been a Land Rover, but even it was its fairly tenuous, and adds little value !!
One rule for some........
-
Tottenham Court Road, if you fancy any electonic goods for your Landie etc. Huge range of ICE stuff and SatNavs etc.
-
PICS
I'm not sure if Al is around at the moment, nothing moves very fast in his workshop. Do you want me to nip over there tomorrow with my PinHole camera and take some photographic plates
-
I have Tomtom fitted on my Ipaq (which is a more expensive one than Marks
). I have memory Map as well in case I go greenlaning in my Mondeo 
Les
He said Laptop, not handheld
-
I think the filling stations are less busy too.
It seems a lot of people are taking measures to use less fuel - myself included.
-
Not much to say, that hasn't been said already except
Good Luck, and bring back a trophy
-
Al will be along in a minute I'm sure.
He'll be the one with his tail between his legs
But it was worth a shot, as that gearbox is shot. A gearbox sump that has obviously got /very/ hot, dark and smell fluid, metal bits - everything you don't want to see
-
Well here is my setup. All up it weighs 26kg, I don't think you could do an 8,000lb winch setup much lighter
Spec is as follows
- * Warn M8000
* Reciever Hitch mount from David Bowyer
* Allbright style solenoid pack
* 350A Anderson connector and all new wiring
* Superwinch metal hand controller
* ~85feet of thick plasma
* Ali fairlead
Richard - if you are interested - flick me a PM. It all works 100%, but the motor is nothing special - being a 2nd hand motor from a vapour builder. It works fine, just a regular 2HP jobbie.
Andy
- * Warn M8000
-
Problem wasn’t’ with the trailing arms as much as with the rear ball joint. The ball joint ripped its steel mounting apart (4mil steel plate).
You need to take out the springs, and its easier if the wheels are off, and cycle the suspension through all possible movement.
This should tell you if the ball-joint is binding, or if the problem is with the weld.
4mm is a bit skinny, the axle case is really thick, so the welding will need to be top-notch.
-
I've got an M8000 on a cradle. I've tried to make it as light as possible with plasma rope, and an ali-hawse.
But I've not skimped on the electrical side with decent gauge cable and an Albright style solenoid pack, and an Anderson connector.
I can throw it on the scales later in the week, but its still pretty heavy, and you certainly wouldn't want anything bigger.
To be honest, i built it up, but I've never used it, and I don't think I will, so it could be for sale.
-
Oh sorry - fogot to ask - how do Thermarests work for people like me who sleep on their sides. I find I need an airbed or my hip digs in. But I've not tried a Thermarest.
). I have memory Map as well in case I go greenlaning in my Mondeo 
Off-topic threads
in International Forum
Posted
+1
It also grieves me that things like Defender crossmember rebuilds are in the International forum, and not the Defender, or possibly fab forum.