porsche

as the front wheels are pointing to different poles , can someone tell me the correct toe in/out for the front wheels please , friend has a tracking device thingy and wants to know correct measurement so we can set it up , then and maybe then we will trundle off to the mot maan !!!!!!

send them back , trade description act , not fit for use , and dont fall fot `its a landrover` thing ;-)

sorry , 300 tdi 97

on the pipes going to the servo pump there is a tiny thin pipe coming from the vacum pipe , on mine it is blanked off with a self tapper ( previous owner ) where in the world is it supposed to go please

cheers

Can someone tell me the correct sequence for bleeding brakes 0n 33 tdi defender 97 , new pipes and fluid allround , servo working o.k as when i start with foot on pedal it goes down slowly , ( phew ) . many thanks

rimmer bros do good bits

sorry no its not it came with the donor 90 300

dont know it off 300 tdi disco 96

Thank you sir

I s this the correct part number for brake servo for 97 300 defender ? Brake Servo-NRC4772

indicators will not stay in the `on` position via the stalk , is it the whole thing i need to replace or some little thing that is a known weakness ?? defender 97 300 tdi , many thanks .

Thank you sir , this forum is so much more helpfull than others I have used in the past !!

Is there a difference between the temp sender on a 300 disco and a 300 90 , as I have put the engine and box from a 96 disco 300 into a 90 , now the temp is half way as soon as I turn it on , in the disco I had to drive about 10 miles before it got half way .Please send informed advice

can happen if they are tightened down too much against the bush , 3 threads is enough

thanks chaps , nearly had baby at cost of postage , sadly our nearest main dealer is Conwy LR and they are complete a--eholes , very very bad customer service , will order on-line

brill , but are they having a laugh at the postage ? 7.00 pound postage !!!

sorry not that one , I think it goes inside the hinge like a piece of hosepipe with slit in it , sorry for being daft !!

Can someone help with the rubber ? insert for the bonnet to bulkhead to stop me scraping all my paint off please

borrowed one from mate with spare engine , it does feel different , will try tomorrow and if all well get new next week , busy day tomorrow auto centre consol coming aswell !!!

no spring pressure , so is it just banging against cam , making noise ??

when the engine was finally started some weeks ago after getting on with build I noticed a tapping noise , friend who is a mechanic came and said he thought vacum pump or cam , so today after much much swearing pump is off , ran engine for 30 seconds and did not notice noise , oil all over place but hey ho that will wipe up , so how does pump work and how do i know it is knackered I noticed whilst playing around the garden in it the brakes where a bit `dead` , not much pressure against the foot , the plunger looks ok , and it is easy to flop in and out , should it have resistance ??? Thank you all again for help , oh did my radiator surround today , cut mounting blocks off surround and just welded the pins straight onto frame , dropped about 1 inch , jobs a gooden .

so could i just cut the brackets off the surround rather than butcher brand new chassis /

Does anyone know if , the radiator surround on a defender has mounting blocks on the underside like the discovery one , if not is it possible to cut the ones of the disco one and drill holes for mounting rubber , I have fitted everything but think the rad and intercooler sitting a little high as not sure if bonnet closing down enough, the surround and rad where from my old disco going into the new 90 .

hi again!!!! changed my alternator , now all the old one needs is new bearings , is it possible to buy new ones and change yourself ? then i could use it as second alt