-
Posts
868 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by dirtyninety
-
-
Nothing, just plug new ECU in, Sync ECU to the BCU and it will be fine. The ONLY thing you need to swap is the ECU.
-
On 12/2/2017 at 12:04 PM, BogMonster said:
It's not real. Somebody on a Facebook page pointed out the poor Photoshop join in the rear door window (follow the line along the top of the window/roof line, it's got a step in it!)
its a mule as confirmed by somebody working at LR..
-
just leave it as it is, its will be fine.
-
Can we ask exactly what you're ordering?
One of my friends is coming home for Christmas from Bentonville, Arkansas
-
my friend had a SD33 in his range rover classic. it was absolutely awful.
nissan 2.7 is an absolutely fantastic engine however!!
-
Jose Amorim at Performance Inside / TD5inside
I was under the impression that TDV8's are down tuned so that they do not smash the gearbox.
-
The competition starts tomorrow (saturday)
Ill be going up on Sunday hopefully!
-
31 minutes ago, muddy said:
Some later tubs have stepped arches that could further hinder clearance? Personally I'd repair what you have, many newer tubs that don't need any repair work are going to be coming from questionable sources IMHO.
Will.
or horrendously expensive!
-
You may find it easier to reuse the NON edc injector pump on the new engine.
"We are looking to merge the two ECU´s together"
There is only one ECU for the EDC engine - the on edc engine has no ECU
-
I see you share the same username as the ebay account... so surely you already know if its a good vehicle or not, you tell us!
also... WTF are those side step/tree sliders??!?!
- 4
-
again, what would require running an lt230 in reverse?
-
D2 axles are fantastically easy to work on. Not the strongest, but they're cheap and plentiful.
-
is the lift pump weak or not working?
- 1
-
I always have discovery transfer boxes for sale for £50.
Axles are £120 a pair off a 300tdi (24 spline)
The only bit i see as worth keeping is the head off the 200tdi.
but then if your engine did blow up id source a cheap 300tdi (~£250) and a defender R380 box.
£500 is steep for a scrap discovery too, i pick them up regularly from £0 to £350
-
Decent diagnostics should be able to operate the EGR valve actuator.
Id be looking suspiciously at the digital throttle control.
-
a VGT could help with the low down torque.
-
Not ignoring basic thermal dynamics at all, but in real world situations a bigger diameter exhaust 99% decreases turbo spool up times and EGT's.
We are talking about a 300tdi, it isnt a finely tuned race engine - by a very very long way.
What do you want out of your engine? more throttle response from idle, more top end or what?
Air filter postion and intake length make a HUGE difference and are easily modified.
-
fridge unit on an artic lorry trailer?
-
-
no need to remove anything from the transfer box
-
Nige - Hybrid from hell on these forums is the man for the job!
-
I would presume you mean EGR valve. two in 12k is very excessive.
You can have the EGR system turned off via a remap. (Off and still does the self clean cycle - the chugga chugga noise when you turn the engine off)
Removing DPF in the exhaust is an MOT fail, however the DPF has a handy heat shield around it, so if you should decide to have the DPF removed, the MOT man can't actually see it because its hidden underneath the shield.
The ford fuel system IMHO is very very poor, they respond very well to a new fuel filter, but a serious pain in the backside to bleed the system up again.
-
This is why its so handy living a few miles from Paddocks - if ever theres a problem I just throw the parts over the counter and quite literally have the correct parts thrown back at me!
-
You'll be fine in a UK climate.
In fact Id say you'd be fine in most climates!
Croatia trophy 2019; new location, new classes.
in Competing in Land Rovers
Posted
loads of photos of the tractor on facebook, Nick Anderson has it!