Jump to content

philbert

Settled In
 View Profile  See their activity

  • Posts

    74

  • Joined

  • Last visited

 Content Type 

Everything posted by philbert

  1. philbert
    Hi all after the name or part no for the rubber doodah that sits on top of discovery 1 coil springs. i believe they dampen road noise cheers Philbert
  2. philbert
    Must admit i run mine on 100% only adding diesel when it gets chilly at night.the only mod to my 200tdi is a heat exchanger.
  3. philbert
    Thanks for the headsup! The delivery driver is going to hate me
  4. philbert
    Hi all got a 200tdi 90 with lt77. bulkhead and seat box are shot! if i get a td5 bulkhead, gearbox tunnel, floor and seat box will they fit without mods with my engine and box??
  5. philbert
    mud stuff used to do them.dont see them listed anymore but worth a call. http://www.mudstuff.co.uk/
  6. philbert
    Thanks i will pm him.
  7. philbert
    Hi All Do x eng still offer a discount to forum members? need to spend a few ££s Had a search but couldnt find anything. cheers phil
  8. philbert
    you could try range rover classic hoses they are only around a £5 each. thats what ive got on my 2a with a round heater and they were too long and had to be cut down.
  9. philbert
    well it would appear to be the hazard switch.removed the panel to look at it and the switch fell apart! at least the indicators work now! cheers all
  10. philbert
    never thought of that! will get a new hazard switch and try that first. thanks
  11. philbert
    Hi all hope you can help. put my hazards on last night for about 2 mins.switched them off and went to indicate to move off and i have no indicators! coincidence? or has the indicator switch chucked it?
  12. philbert
    got to agree with the above bought a 2.25 from ACR with the cam, carb, head, and exhaust, fitted megajolt and it goes quite well! cost an absolute fortune if i did it again i would v8 it. certainly not a patch on a good v8 maybe a sick 3.5 but not as good as expected. fuel economy is a wose than a v8. in other words DONT DO IT ! unless you really have to.
  13. philbert
    Porny pm sent
  14. philbert
    to the breakers it is then ! Thanks all will try and get a set of springs made up.
  15. philbert
    It doesnt have anti roll bars fitted looking for a kit for front and rear
  16. philbert
    where ( now that scrapiron has went titz up) can i get a set of lowered springs and anti roll bars front and back to fit my 90? are there any kits out there or am i making my own.
  17. philbert
    a bit of double sided tape and a big pair of scissors will sort it out.
  18. philbert
    yes they are for radiation hazard protection. Didnt stop me fitting the front part to my soft top 90though. its certainly warmer and quieter now!
  19. philbert
    Have thought about going 24 spline in the rear.But as i Have a new 10 spline slipper i think it would be more cost effective to get uprated 10 spline shafts than sell the diff at a great loss and buy a 24 spline slipper new shafts and drive members.
  20. philbert
    if anybody fancies a set of 10 spline uprated shafts then pm me. if enough folks get interested we could get a batch made!
  21. philbert
    me too ! i need stronger shafts on the back of my swb after fitting a slipper. if enough of us want them why dont we see about getting a batch made?
  22. philbert
    will this all fit with a lt77?
  23. philbert
    Ok i would like to know the differences between the 200 and the 300 tdi seat boxes. i can get a new 300 tdi seatbox for not a lot would it fit my 200tdi? is the only difference the gearbox aperture? (big word!) could i just graft on the aperture from the 200 seatbox to make it fit? help please.
  24. philbert
    that would appear to be the right part number.
  25. philbert
    this might help http://www.s2cforum.com/forum/index.php?topic=16701.0
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept