goaty

havent noticed any difference, i just did it so mine would warm up wuicker and it sure does. Hasn't had to run yet but i sometimes use it off road when the rad is wet to clear steam away from my windscreen

Nice one, i was being a tard by the looks of it. cheers for the help

i looked in there but didn't see it

Any chance of a quick qalk through of changing a CV?? Just which bits i need to remove, i am sure i could work it out but just havent got time to look at it at the mo, also unsure which CV i need. Thanks again

Hi, I recently stumbled upon a spare front axle, its a 1996 300tdi defender front axle with vented discs but i have a problem with one of the output shafts. I thought it may have been the drive flange having its thread stripped but it turns out it is the CV shaft thats got ruined splines. Now i am planning on fixing it but i am unsure how and which part i need to buy, can anyone help? Also is it worth buying the cheaper pattern parts or is my money better going on a Hardy spicer or similar, which are double the cheaper ones. Any info and help.....please. thanks joe

Yes

Hi, Can anyone tell me which is the best or which way have you all run your wiring out to your roof mounted light bar?? Am wiring mine up now but wanted to ask everyone opinions. Thanks

Tahnks guys, sorry i should have said a patern part is £1

I was thinking FRC8220 but wasnt sure as arent they the later axle's with M10 thread caliper bolts?? such as defenders?? Or would it be a pre 1985 RR axle making it FRC4586?? But to be honest i will just order both of these as they are only a £1 each so it covers me either way. Thanks again joe

Hey all, I have fitted a disc braked rear axle to my 90 but i need to know which one it is as i need a new pinion seal. I think its an early range rover one but i am not sure and i have no idea which year this woudl mean. I am thinking its an early range rover as the Brake caliper retaining bolts are UNF thread as apposed to the later M10 threaded axle casings. Can anyone help me with this?? I have the week off work so now the time for me to fix all the little problems i have. Thanks in advance joe

nice one, thanks very much.

Hi, Can anyone tell me if the diff ratios are the same on 200tdi defenders and 300tdi's??? thanks

pics would help a great deal if poss please.

Hey, Is anyone able to shed some light on this?? 'Cranked trailing arms from Jez on here, plus a few shims correct the rear diff position.' Does Jez still make them and any more info on them, and what and where did you use the shims?? cheers

i use that same fan with the X switch but just cable tied mine round and through the outer rad/intercooler frame so it wont damage any fins. cable ties all the way and wont budge at all. Well worth the £15 i paid

nice one, thats gave me the little bit of confidence i needed in it. will happily leave it running all eve now if i have to.

Hi, I have now got my Ford leccy fan up and running on my 200tdi 90 but i wanted to ask other peps who are running them a couple of questions. I am running an X eng switch in the bottom hose and i have a racetech temp gauge to keep an eye on things. Now so far i went green laning yesterday and with all the road driving the engine didn't climb more than 80ish degrees so the fan never had to come on. Is this a normal thing for them?? or is my new gauge broke already??? O and io am running an 82 dgree stat. any info please?? thanks

wicked, i was thinking i may be a 20amp but if yours works fine on 10amp thats what i shall run.

Anyone advise on which size fuse should be used with this Ford fan?? cheers

cheers but i would have measured if i had them both, but i dont . thanks anyway

Hey, Coudl somebody tell me if the Discovery 1 front prop would fit on my 90 running a LT77 + LT230 set-up please? thanks

Nice one, cheers guys How long does it ruffly take?? only got one side to do.

Hi, I am new on here and have tried to search but with no joy so i was hoping somebody could help me out a little. I need to rebuild one of my Swivel housings and wanted to see if anyone could giv em e alittle info or a guide on how to do it please. I have seen a guide somewhere before but can find it again. Thanks in advance

i dont aim for rocks etc. Sometimes things just get the way

i just searched Nylon Tubing on ebay and bought 6mm/15m for £6ish delivered, worked a treat and a choice of colours