right so i went out yesterday and took the motor apart but not sure if iv done this correctly, i took out the wheel and rotated it 180 degrees but im now thimking that ramp on the back should have been unclipped and moved 180 degrees. ??
Hi, currently rebuilding my 90 and have just fitted the brake master cylinder to the bulkhead but notice one of the plugs on the cap has broken off, the big question is do i really need the cap with the plugs or can i just replace it for an ordinary (plugless) cap?
cheers, would you mount the bulkhead using the large bolts through the outrigger first or try and mount it to the brackets up front and then try and manouver it in place?
hi, im currently rebuilding my 1985 90 but its on a go slow.
im finally mounting the body but could really do wi some advice on how to line it all up and where to start (front or back)??
please be gentle im just a newcomer here.
cheers
hi all, im new to all this forum stuff so please be gentle.
currently im rebuilding my 1985 90 onto a galved chassis and bulkhead and have got to the stage of building up the bulkhead.
the problem is as ive used a td5 bulkhead my wiper wheelboxes wont mount the correct way up as they used too due to a bracket in the middle of the bulkhead so i have mounted the wheelboxes (td5 ones) upside down and also used my old motor form the original bulkhead.
the big question is will the wipers clear the window or clear the bulkhead?
would prefer to find out now before i finish building up the dash.
cheers