[Brackets on the wing that support radiator and intercooler]

Looking for the partnumbers of the brackets left and right side on the wings that support the radiator and also keep the stay-bonnet.

For a td5.

[Td5 head question]

I had the same problem...

http://www.lrocb.be/LR_Doc/Defender/TD5_eu2_eu3_engine_differences.pdf

[Where to find track rod nuts for sumo bar?]

@Ross: I also bought some lemforders and they fit on them

[Where to find track rod nuts for sumo bar?]

For info, they are £1 each from Paddock.

They are not listen but they can be added to an order by phone.

[Diff from rear axle in front axle?]

Ok, so I'll swap it.

Thx

[Diff from rear axle in front axle?]

Any objections to put a diff with arb from rear axle in front axle?

[Where to find track rod nuts for sumo bar?]

Where can I find online the nuts that go on the 11/16" x 16UNS thread to lock a sumo bar for a normal price?

[Belgian Defender Celebration Day 31-10-2015]

And the result:

[Belgian Defender Celebration Day 31-10-2015]

Coming saturday we want to show that over here on the mainland we can also design a Defender on the beach but using real Defenders and Series

The fat black lines will be made up by Defenders and Series, Until now we have more than 200 cars participating, probably getting about 300 cars together.

You are welcome to participate, register at www.lrocb.be

We can offer a roadbook on Sunday along the frontline of WW-I

[Mapping help]

Is something like this no solution?: http://thetrkhub.azurewebsites.net

[Newbury Sortout 4th October 2015]

I spotted Ross and Si, The rest here I do not know by face.

Bought a lot of stuff including 2 Wolf lockers but with the wrong doors

[caliper rebuild kits]

Bought mine from Paddock and is 316 grade ss. You should take the lochead seal kits, they fit perfect and very easy to install

[Gon2far suspension setup]

These I still have laying on the shelf but a bit wider than Series leafs

[Brake piston 110 Rear identical to the front ones?]

The Paddock version seems to be 316 according to a good friend who knows where he talks about. In fact after I showed them to him, he bought also a set

[Brake piston 110 Rear identical to the front ones?]

Thanks

[Brake piston 110 Rear identical to the front ones?]

I am rebuilding the front and rear brake calipers of my 2002 110 with rear Salisbury axle and as I was very pleased with the Stainless steel kit from Paddock (real SS 316) for my 90 I wanted to order a same kit for the 110.

However they have not a SS kit for the rear it seems.

The rear pistons has partnr SEE500130 and after some googling the following link http://www.shop4autoparts.net/Defender/Brakes/Discs,Calipers-&-Drums/stc1280st-c-piston-repair-kit-stainless.html tells me the pistons are identical to the front ones.

Is this correct? are they also 46x31mm?

[What GPS for On and Off Road?]

One more vote for Oziexplorer. I use it now more than 10 years. It runs now on a Panasonic CF-19 with usb mouse as well as on a asus tablet with android and build-in gps.

There are lots of maps available. If we go to do some offroading in Romania; we run Ozi on 2 pc's at the same time with different maps loaded (1/25.000 and 1/50.000).

[Wiring Diagram]

Or this one:

http://www.lrocb.be/LR_Doc/D1/D1_Electrical_Troubleshooting_1995.pdf

[TD5 - Euro2 head on a Euro3 type engine ???]

Bought an accidented 110 TD5 with 15P type engine (Euro3).

The engine has a hole in the alu housing so needs a new head.

Now I have a good head here in the garage but it turns out to be a 10P (Euro2) type.

Can I swap the injectors and use the 10p head or better search a 15p head?

[Greenlanes in Normandy and the Somme]

There is Marquenterre, a beautifull offroad terrain in the baye of the Somme. Expensive and you have to follow a guide but worth every penny.

[Green laning in North west Frankrijk?]

Not yet on FB

We arrive on the 11th in Marquenterre, driving on the 12th with BBQ that evening, breakfast on 13th and then home

Eventually you can combine it with a 330km roadbook back to Flanders

[Green laning in North west Frankrijk?]

Why don't you go with us to Marquenterre early September?

[Chassis swap - what can be improved]

http://www.landyzone.co.uk/lz/attachments/f7/34730d1345536441-roll-cages-chassis-img_5595.jpg

difficult on an ipad to insert images...but was thinking about something like this

For the legal part: here in Belgium in case your vinnr is unreadable, you go to an official LR dealer and ask them to put the number in once again. Costs about 140£ and you're ok for the MOT.

mostly you do it yourself and just pay for the document ...

[Chassis swap - what can be improved]

Bought a 3 door 110 that needs a new chassis and found already another chassis.

Want to get it galvanised before the swap but what can I do before galvanising to make it stronger and eventually forsee rollcage points or other things ????

[Waterproof air filter box solution]

If I remove the heating, I have place enough for a standard 200tdi or 300tdi housing at the RH side but then I've to put the snorkel there as well.

With this filter I can put the snorkel very close to the inlet at the LH side