Jump to content

henk

Settled In
 View Profile  See their activity

  • Posts

    481

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by henk

  1. henk
    All true, but once you have an hydraulic winch with proper pump, you never want another one again!
  2. henk
    If you go hydraulics then go for a pto pump or similar otherwise you never use the full capacities of the winch.
  3. henk
    What do you think of this solution? I have a galva chassis and this way I do not need to weld a plate on it to go the p38 way And
  4. henk
    And saturday morning we visited Design & Development Engineering
  5. henk
    My best buy for the granddaughter
  6. henk
    Weather was dry but very very windy, unable to put on our shelter so sitting outside saturday evening
  7. henk
    So who will be there Saturday and/or Sunday?
  8. henk
    @delivery in uk: no not yet 😎
  9. henk
    Did some research here and found that simonr designed them so contacted him. Ross, you come to Newbury?
  10. henk
    Ross, I think they are just lifting or pushing. The Free/high actuator at the side looks to have an external spring. The top one (block/low) is just lifting I think Here a picture
  11. henk
    Is there an alternative around for the air operated actuators that Blackdown is selling to get freespool/low/high on a Mile marker hydraulic winch?
  12. henk
    I read a lot of tests from this guy:
  13. henk
    Thanks for clarifying
  14. henk
    It was sold to Belgium around 2009/2010, the tasc disc or SORN runs out at 04/2010. So not really a recent issue
  15. henk
    I can buy a modified 88 to Tomcat over here in Belgium and as far as I can see it has been registered as a historical car in the UK. Got a photo of some V11 document but my question is: Is this enough paper to import it in another country?
  16. henk

    Liege

    henk replied to Snagger's topic in International Forum

    Too far from Ghent
  17. henk
    I use Tinycad to document my electric stuf in the Defender. There are a lot of things available in their library
  18. henk
    Anyone here who made himself a freespool on a hydraulic Milemarker? I have a freespool of a Goodwinch laying around but I have the impression that freespool on a 'normal' winch is engaged by turning an handle in/out contrary to a Milemarker where you pull a pin in/out or am I wrong?
  19. henk
    I have an Atom locker in the front of the 110. Does what it needs to do http://www.atom-9.com/product/atomlaro-24spline-chromoly-locker/
  20. henk
    Have to look at it again to see if I can rename them or re-upload things but in pension since I uploaded this so less time now
  21. henk
    All on Fridgefreezers site comes from me 😎
  22. henk
    All on the disk you got from me!
  23. henk
    Hi Paul, thanks for the link but it seems they only sell to companies. Ref nr seems to be 344113-1 | AMP I found an older post of you where you say the same pins are used in a 6-pin econoseal connector that is probably easier to find on amazon or so
  24. henk
    Looking to buy the pins that go into the td5 ecu connectors but preferable in main land Europe. https://www.ebay.co.uk/itm/165540997395?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7nCeawfWQoG&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY
  25. henk
    Here the layout for RHD
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept