Jamie96 Posted November 25, 2017 Share Posted November 25, 2017 I have a 200tdi 90 and want to install a wiper motor on the back door and hopefully a heated windscreen. Is the cabling for this already in the look or will I need to install it separately? Thanks Jamie Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted November 25, 2017 Share Posted November 25, 2017 Might be there. Remove the corner light wiring cover and have a look. Quote Link to comment Share on other sites More sharing options...
oneandtwo Posted November 26, 2017 Share Posted November 26, 2017 On a 200tdi as well as the door loom the heated windscreen requires a separate plug in loom in the dash which incorporates a relay and the switch. The dash loom usually has the wiring for the wiper switch already. Quote Link to comment Share on other sites More sharing options...
western Posted November 26, 2017 Share Posted November 26, 2017 Autosparks can supply a loom for the rear end if it's not factory fitted. REAR DOOR HARNESS - 90/110 PART NO:LR679FINISH:PVC Cables with a Taped Outer CoveringCHASSIS NO:939976 - on Defender 90/110 Rear Door Harness with HRW and Wash/Wipe. Two Plug Wiper Motor and Washer Bottle in Engine Bay. AMR3124 or obtain the loom from a scrap vehicle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.