Arjan Posted January 29, 2018 Share Posted January 29, 2018 Goede Avond, I use the " Brantz International 2 Pro rally trip meter" ind was wondering what others with these meters use for the signaal input. I used to have magnets on the hand brake drum - but with the new set up, that's not an option. There is no drum.. Suggestions please ! Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted January 29, 2018 Share Posted January 29, 2018 I've stuck speedo magnets to the transfer box flange with no problems. Quote Link to comment Share on other sites More sharing options...
Arjan Posted February 1, 2018 Author Share Posted February 1, 2018 Thank you ! Any pics ? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted February 1, 2018 Share Posted February 1, 2018 No, sorry, it was just held there by magnetism, the force at that diameter never made it fly off On the back face of the flange, transfer box side, if you see what I mean? Quote Link to comment Share on other sites More sharing options...
martyn668 Posted February 1, 2018 Share Posted February 1, 2018 I’ve got the basic Terratrip model, which I had on my Series, and which took s signal from the Speedo cable. (I cut it in half and clipped the sensor between the two halves.) Then I transferred the Terratrip to my 90, and cutting the speedo cable wasn’t an option for me, so I attached a piece of flat steel about the size of my little finger to the prop shaft bolts. You can get a proximity sensor which takes a signal every time the prop shaft rotates. Assume there must be something similar for the Brantz. Quote Link to comment Share on other sites More sharing options...
martyn668 Posted February 1, 2018 Share Posted February 1, 2018 P.S. I bolted the proximity sensor to the top of the transfer box, again using a small bracket made from the same flat steel. Quote Link to comment Share on other sites More sharing options...
Arjan Posted February 1, 2018 Author Share Posted February 1, 2018 Cutting the speedo cable is a good opton - I'll have a look at the sensors... Thanks Quote Link to comment Share on other sites More sharing options...
martyn668 Posted February 2, 2018 Share Posted February 2, 2018 Item number T006 on www.terratrip.com Quote Link to comment Share on other sites More sharing options...
martyn668 Posted February 2, 2018 Share Posted February 2, 2018 I used the T005 wheel sensor, but set up as described to take a reading from the propshaft. Not my idea - credit goes to Terratrip, way back in 2001! Quote Link to comment Share on other sites More sharing options...
Arjan Posted February 2, 2018 Author Share Posted February 2, 2018 Thank You Very much ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.