ianmayco68 Posted April 16, 2020 Share Posted April 16, 2020 Hi all looking for a bit of help for the stepson as I don’t know a lot about td5’s , he’s got an early td5 2000 and the rads knackered so ordered a new one from britcar , rad came a nissens jobbie but it’s modified it fits all td5’s but the bottom two outlets on the rad are blocked and there’s a small ali thing you put in the fuel cooler , has anyone had to do this with there rad and did you bother with the thing in the cooler above ? Any help much appreciated as always cheers Ian. Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted April 16, 2020 Author Share Posted April 16, 2020 It's okay he's found the LR write up on internet . Quote Link to comment Share on other sites More sharing options...
Lightning Posted April 17, 2020 Share Posted April 17, 2020 They sent a Nissan one modified to fit a TD5? Why did they just send a TD5 one, or am l missing something? Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted April 18, 2020 Share Posted April 18, 2020 Nissens is a radiator manufacturer. Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted April 18, 2020 Author Share Posted April 18, 2020 Nissens not Nissan, Apparently Land Rover altered them , there’s a tech article on the web somewhere the stepson found it and when I looked there’s a thread on here about it it blocks the bottom two outlets off from the fuel cooler and you put that ali bit into the end of the fuel cooler too restrict the flow . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.