MogLite Posted June 21, 2007 Share Posted June 21, 2007 I've been offered a 12'x 6' Ifor Williams flatbed trailer at sensible money. Alas I need a bed width of ~7' for MogLite. Do you think it would be feasible to bolt on 6-9" extension to each side to add some width. With a bit of triangulation down to the main chassis rails ? Moglite is on 12" tyres, and the rear track is 6'6" but the front track is closer to 7", so a fair percentage would be on the original bed. Quote Link to comment Share on other sites More sharing options...
bishbosh Posted June 21, 2007 Share Posted June 21, 2007 Almost certainly Andy. Just make sure you detail it right! (Consultancy services available for a small fee!! ) usual terms and conditions apply...... Quote Link to comment Share on other sites More sharing options...
western Posted June 21, 2007 Share Posted June 21, 2007 just keep it within these limits if using a Towing vehicle up to 3500kg GVW Maximum Trailer Dimensions Length (excluding the coupling and drawbar) 7.0 m Width Maximum 2.3 m going above these will mean towing with a vehicle over 3500kg GVW [i.e. & 7.5 tonne truck] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.