dbartle9 Posted September 5, 2007 Share Posted September 5, 2007 I have got an early SII V8 discovery with a (very) broken R380 box (suffix L I believe), the question is will a SI V8 R380 be a suitable substitute? I know the bell housing is physically different, but I can swap these over, whats more important is input shaft length etc. Can anyone shed some light? Any help would be much appreciated. Dave Quote Link to comment Share on other sites More sharing options...
BogMonster Posted September 5, 2007 Share Posted September 5, 2007 are you sure the bellhousings are different? just that I thought all the V8s use basically the same block so you might even find it goes straight on... Quote Link to comment Share on other sites More sharing options...
western Posted September 5, 2007 Share Posted September 5, 2007 EPC shows Disco 1 & Disco 2 bell housing as different part numbers. Quote Link to comment Share on other sites More sharing options...
dbartle9 Posted September 5, 2007 Author Share Posted September 5, 2007 I've seen a SI box on fleabay that has definately got a different bellhousing to the one off my SII, but the rest of it looks to be the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.