outdoor_ian Posted November 7, 2009 Share Posted November 7, 2009 I'm in the process of removing my dash on a 1994 defender 90. The bit I'm having a little trouble removing is the grey trim that is infront of the the vents/flaps. I have pulled out the 2 large grey plugs however there seems to be 5 or so little grey plastic nail looking things holding it in place along the bottom and they appear to go into the bulkhead. Any help on removal and or part numbers to replace them as they seem pretty well stuck in, so I'm guessing they will need replacing afterwards? Many thanks Quote Link to comment Share on other sites More sharing options...
western Posted November 7, 2009 Share Posted November 7, 2009 give them a good tug with thin nose pliers, new ones are RTC3750 here Quote Link to comment Share on other sites More sharing options...
Dads Toy Posted November 8, 2009 Share Posted November 8, 2009 Yep, pigs to get out. When I took mine off I used a pair of sidecutters as the sharp edge allowed me to get under the head, then a bit of levering and the correct swear word and off they came. Actually manged to re-use them but I think I was lucky. Malcolm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.