Land Rover 90 Truck Cab

[Wingnut]

A friend of mine has bought a two year old 90 truck cab. He has also bought a "New" secondhand tilt and stick set (removed from another new 90 which was fitted with an Ifor Williams hard top).

The tilt and the hood sticks are immaculate but some bits were missing - and this is the question/problem:-

Where can he get the piece from that holds the tilt into the channel at the base of the rear window from?;

There are four ninety degree turn toggles that clip this piece of metal to the channel already fitted to the 90, these were also not with the kit - can they be bought separately?;

Are the clamps that hold the hood sticks to the body available from anywhere?;

He has been in touch with the local dealers and none of the above items are available from them - only as part of a complete rear soft top/tilt.

Thanks in anticipation to all those that reply.

Peter.

[mel]

A friend of mine has bought a two year old 90 truck cab. He has also bought a "New" secondhand tilt and stick set (removed from another new 90 which was fitted with an Ifor Williams hard top).

The tilt and the hood sticks are immaculate but some bits were missing - and this is the question/problem:-

Where can he get the piece from that holds the tilt into the channel at the base of the rear window from?;

There are four ninety degree turn toggles that clip this piece of metal to the channel already fitted to the 90, these were also not with the kit - can they be bought separately?;

Are the clamps that hold the hood sticks to the body available from anywhere?;

He has been in touch with the local dealers and none of the above items are available from them - only as part of a complete rear soft top/tilt.

Thanks in anticipation to all those that reply.

Peter.

Hi Peter,

What about trying Exmoor Trim or All Wheel Trim who make and supply canvas tilts etc as i'm sure they'd do them or atleast know where to get them from.

H.T.H.

Mark

[del]

John craddock may have the parts you need , failing that try exmoor trim, there used to be a company called "all wheel trim" they used to carry all the parts for landrover softtops but I dont know if they went down in the recession there old web page had loads of bits on it

[PaulN]

As per 'Mel' - I can definitely recommend you speak to Kim Johnson at All Wheel Trim - Good bunch there!

[western]

There are four ninety degree turn toggles that clip this piece of metal to the channel already fitted to the 90, these were also not with the kit - can they be bought separately?;

these are usually called Dzus fasteners.

stud AFU2503 x 4

& you'll need the retaining rings for them

retainer AAU2367,6th line from top of list on this page

Strips MTC4504 & MUC7923 at bottom of cab rear window on the 2nd link above items 10 & 12 in the list.

hope that helps if these sites can't supply then a main dealer should be able to supply.

[Wingnut]

Thanks to those that replied, I have passed all the information on - another satisfied 90 owner.

Peter.