sirleefellow Posted December 30, 2009 Share Posted December 30, 2009 thinking of fitting electronic ignition to my 1980 ex-mod series 3 12v. I am sure many of you will have carried out this job and I would like some advice on best unit and what is involved in conversion.should have added it,s a 2.1/4 engine. grateful for any advice as there are a few diffferent types about with a big difference in price. thanks, Mark. Quote Link to comment Share on other sites More sharing options...
tuko Posted December 31, 2009 Share Posted December 31, 2009 I used this product a few years ago when I had the petrol engine in my series 3. Classic Spark Top quality product! Todd. Quote Link to comment Share on other sites More sharing options...
patch1 Posted December 31, 2009 Share Posted December 31, 2009 Go on ebay (if I can say that) and pick up a new electronic Dizzy for about £50, pritty good. Quote Link to comment Share on other sites More sharing options...
Jon White Posted December 31, 2009 Share Posted December 31, 2009 EDIS is far and away the best solution. Absolutely maintenance free and it'll run underwater! Run on its own with megajolt lite junior its a freat setup for improvements over the stock setup without getting too complicated. Jon Quote Link to comment Share on other sites More sharing options...
Quagmire Posted January 4, 2010 Share Posted January 4, 2010 Seconded! I have it on my 90, but want to get my youngest brother to Megajolt his s3 when its back together Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.