Disty Posted November 17, 2010 Share Posted November 17, 2010 I have bought some 285/75R16 STT's and 16x8 modulars. I'm guessing in addition to my lift and cutting the arches, that I will need to use some spacers to avoid having terrible steering on full lock. Can I get away with adding some 10mm wheel spacers- the ones without their own studs? I'm talking about these: 10mm Wheel Spacers on Fleabay Quote Link to comment Share on other sites More sharing options...
PaulMc Posted November 17, 2010 Share Posted November 17, 2010 I have bought some 285/75R16 STT's and 16x8 modulars. I'm guessing in addition to my lift and cutting the arches, that I will need to use some spacers to avoid having terrible steering on full lock. Can I get away with adding some 10mm wheel spacers- the ones without their own studs? I'm talking about these: 10mm Wheel Spacers on Fleabay Not with the standard length studs. You could, if you fitted longer studs - FRC7577 But they're not cheap - do a forum search for "FRC7577" and "Wolf Rims" . Quote Link to comment Share on other sites More sharing options...
Disty Posted November 17, 2010 Author Share Posted November 17, 2010 Thanks Paul! Damn, I only recently rebuilt the swivels and hubs, and now I have to take them to peices again!! I'm going to need those spacers though, aren't I... grr! Quote Link to comment Share on other sites More sharing options...
cackshifter Posted November 17, 2010 Share Posted November 17, 2010 It does depend on the offset of the modulars - some of them have 8mm some have zero offset (DiscoRon on here says Simmonites sell them). Might be easier to swap to zero offset modulars than use spacers, extend the studs etc etc? Nigel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.