Turbocharger Posted January 14, 2011 Share Posted January 14, 2011 You could measure one halfshaft through the breather hole, and have a second trigger wheel on the propshaft. There'd be ratio and resolution challenges - and you'd need to provide a breather hole for the axle too, of course! Quote Link to comment Share on other sites More sharing options...
Gazzar Posted January 15, 2011 Share Posted January 15, 2011 Yup, I mean people have to drill and tap cast to fit an ARB, at least an axle tube is pretty thin wall. God help DIY fitters of KAM lockers! I'd expect that, but there are a lot of people whose abilities lag behind their desires, so to make it bolt-on would be a plus. if this was open source, though, both options are open! G Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.