scabbydisco Posted March 3, 2011 Share Posted March 3, 2011 is it really worth the work to blank this off? Quote Link to comment Share on other sites More sharing options...
auf_wiedersehen_pet Posted March 3, 2011 Share Posted March 3, 2011 It took me 5 mins. I didn't notice a difference but most posters would disagree. Quote Link to comment Share on other sites More sharing options...
Niamh Posted March 3, 2011 Share Posted March 3, 2011 Work? 15 Mins... Takes longer to replace the bottom hoses with silicone ones. Niamh Quote Link to comment Share on other sites More sharing options...
Wolfie69 Posted March 3, 2011 Share Posted March 3, 2011 I have noticed a slight drop in the revs ie when doing 60mph the difference is about 250rpm so for only a few minutes work I think it is worth it Quote Link to comment Share on other sites More sharing options...
Dannytd5 Posted March 4, 2011 Share Posted March 4, 2011 I've notised it's a bit crisper and inlet manifold is clean but this is on a td5 Quote Link to comment Share on other sites More sharing options...
karlo Posted March 4, 2011 Share Posted March 4, 2011 300Tdi Auto, I noticed a little bit more grunt low down especially when cold, coupled with a de-cat mad a small noticeable difference at low revs. Don't expect huge power gains Quote Link to comment Share on other sites More sharing options...
MITCHF Posted March 4, 2011 Share Posted March 4, 2011 300Tdi Auto, I noticed a little bit more grunt low down especially when cold, coupled with a de-cat mad a small noticeable difference at low revs. Don't expect huge power gains Same here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.