willfromsussex Posted May 22, 2011 Share Posted May 22, 2011 Looking for a face vent for a late RRC dash, (rectangular) Also the trim panel around the front of the heater. Also the heater panel bulbholders (they clip into square holes ) are they avaialble new anywhere, I can't find them. Are they used on anything else such as discoveries? Hope ok to post in RR section rather than general wanted (not had much response over there before) Thanks Quote Link to comment Share on other sites More sharing options...
task Posted May 23, 2011 Share Posted May 23, 2011 try LRSeries.com other than that, ebay or ask some kind soul breaking one Quote Link to comment Share on other sites More sharing options...
willfromsussex Posted May 23, 2011 Author Share Posted May 23, 2011 Thanks, emailed em. Also looking for the countersunk screws that hold the bonnet hinges (external) to the bulkhead. THey are 5/16 UNF, can't seem to get these from local bolt supplier. Quote Link to comment Share on other sites More sharing options...
SteveRK Posted May 23, 2011 Share Posted May 23, 2011 I dont think the heater surround panel bul holders are available on their own. I had to bodge/glue mine back after removing them (glued in from new) Quote Link to comment Share on other sites More sharing options...
willfromsussex Posted May 23, 2011 Author Share Posted May 23, 2011 Glued in? That doesn't sound right. Quote Link to comment Share on other sites More sharing options...
task Posted May 23, 2011 Share Posted May 23, 2011 I have the panel from mine in front of me at the moment and it has 3x square white bulb holders. They seem to be a PITA to remove though. If push came to shove I can't see it being too hard to whack a couple of LED's in there with a glue gun What trim panel is it you're looking for? I have a panel from a late (1993/4) non softdash but I'm not sure it's the exact part you're after Quote Link to comment Share on other sites More sharing options...
mickeyw Posted May 23, 2011 Share Posted May 23, 2011 Glued in? That doesn't sound right. My 1990 model had been messed about by a previous owner who had broken half of the clips that hold the lamp holders in place. They are Araldited in now, but I don't think they started that way. Quote Link to comment Share on other sites More sharing options...
willfromsussex Posted May 23, 2011 Author Share Posted May 23, 2011 This bit. The right hand side of mine is missing. My car is 72 but i'm putting the heater and dash from an 89 in it. Quote Link to comment Share on other sites More sharing options...
g&t Posted May 25, 2011 Share Posted May 25, 2011 I needed two bulb holders (ADU4903L) a couple of years ago & after much searching found a LR dealer elsewhere in the country that had just three left, so I bought them all. Perhaps the same item is used by other manuf? Quote Link to comment Share on other sites More sharing options...
task Posted May 25, 2011 Share Posted May 25, 2011 ADU4903L apparently superseded ADU4903; http://www.rimmerbros.co.uk/Item--i-ADU4903 http://cgi.ebay.com.my/Austin-Maestro-Montego-Sockel-Birne-ADU4903-/310298376217?pt=Autoteile_Zubeh%C3%B6r&hash=item483f397819 7 available there Quote Link to comment Share on other sites More sharing options...
willfromsussex Posted May 25, 2011 Author Share Posted May 25, 2011 Brill thanks for part number. Need to find someone who still has some. Edit: found a dealer who had just two, about £4 each, so i ordered them. Hopefully can bodge two of mine to work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.