zim Posted September 27, 2011 Share Posted September 27, 2011 Evening, I've just been assembling an ashcroft 4.11 pinion in my diff.... but realised that i'm missing the bolt which holds the drive flange on. Can anyone tell me what thread & length they are so i can nip into town tomorrow ? I realise i could order one from ashcroft, but for 75p they won't be going broke and I'll have my diffs back together tomorrow http://www.ashcroft-transmissions.co.uk/index.php?act=viewProd&productId=314 Cheers Gordon Quote Link to comment Share on other sites More sharing options...
Landy-Novice Posted September 27, 2011 Share Posted September 27, 2011 M12 X 30MM Quote Link to comment Share on other sites More sharing options...
zim Posted September 27, 2011 Author Share Posted September 27, 2011 I thought i tried an m12 in it without joy....ah well, must of been cos it was late Thanks. 3 diffs to build tomorrow Quote Link to comment Share on other sites More sharing options...
Landy-Novice Posted September 27, 2011 Share Posted September 27, 2011 it should be, i goggled the part number and a result stated the above. Quote Link to comment Share on other sites More sharing options...
jai_landrover Posted September 27, 2011 Share Posted September 27, 2011 I have to buy a flange kit from ascroft at some point. I won a pair of used 4.75 CWP's will fit the front to the trialer and keep the rear incase we build an 88 for comp safari rarther than a salisbury. Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted September 28, 2011 Share Posted September 28, 2011 Carefully - those are special flanged bolts I think ht too - do not just bung any old bolt in .... I have some here. Can post if you are desperate foc Nige Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.