zim Posted November 5, 2011 Share Posted November 5, 2011 Morning, I am looking for an M16 banjo that has a male thread on it, either in -6jic or 3/8 bsp. It is to make up a little test gauge for power steering pumps etc. However, i refuse to pay £21.96 for one !!!! http://www.merlinmotorsport.co.uk/p2228/M16-BANJO-X-6JIC/product_info.html Any other possible sources ? Or am i going to have a go on the lathe ? Gordon Quote Link to comment Share on other sites More sharing options...
fozsug Posted November 5, 2011 Share Posted November 5, 2011 Have you tried a hydraulic shop, i know Hyphose down here do them , but not with male thread, only a 3/8 hose tail on them, £ 3.82. Quote Link to comment Share on other sites More sharing options...
zim Posted November 5, 2011 Author Share Posted November 5, 2011 I can find them to swage on, but was just after a little fitting that i could store in the tool box. Rather than a hose hanging off the end. Quote Link to comment Share on other sites More sharing options...
MECCANO Posted November 5, 2011 Share Posted November 5, 2011 a bit cheaper: http://www.thinkauto.com/acatalog/On_line_shop_Male_JIC__AN776__214.html Quote Link to comment Share on other sites More sharing options...
ejparrott Posted November 6, 2011 Share Posted November 6, 2011 try www.simpsonsupplies.co.uk I've used them for fuel stuff before Quote Link to comment Share on other sites More sharing options...
forkrentfitter Posted November 6, 2011 Share Posted November 6, 2011 google harrier fluid power,they seem to do most of everything reasonable prices too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.