cactus Posted March 27, 2012 Share Posted March 27, 2012 Can anybody tell me how to tell if my cylinder head is "Metric" ? I've had question from sombody who wants to buy my Turner Unleaded Head. Thanx.... Quote Link to comment Share on other sites More sharing options...
Gazzar Posted March 27, 2012 Share Posted March 27, 2012 Wouldn't have thought so, But it shouldn't matter if you sell the head with all the studs and other fixings. I fitted a metric head to my imperial 5 bearing engine ages ago - some rework necessary for the heater pipes as I recall, other than that it was fine. Quote Link to comment Share on other sites More sharing options...
cactus Posted March 28, 2012 Author Share Posted March 28, 2012 Thanx.....That's what I thought too! If they can fit a head then hoses will be a walk in the park!!! Quote Link to comment Share on other sites More sharing options...
Phil Hancock Posted March 28, 2012 Share Posted March 28, 2012 For identity via bolts on thermo housing. 7/16" spanner = imperial 10mm spanner = metric. The metric heads are usually black. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.