ejparrott Posted April 4, 2012 Share Posted April 4, 2012 I think I already know the answer to this......Is there a part number for an infill strip to go between the inner wings/wheel arches of a 90/110 to the wing? Or is it integeral with the eyebrows? Fitted the 90/110 inners to my 109, but of course there's a 3" gap to the edge of the wing. I could make a rubber filling strip, but why if there's a Land Rover part already out there? Quote Link to comment Share on other sites More sharing options...
Dave W Posted April 4, 2012 Share Posted April 4, 2012 It's part of the eyebrows. Quote Link to comment Share on other sites More sharing options...
landy V8 Posted April 4, 2012 Share Posted April 4, 2012 integral to the front wheel arch eyebrows Quote Link to comment Share on other sites More sharing options...
discomikey Posted April 4, 2012 Share Posted April 4, 2012 yeah. i put inner wings on Brian and cut out the standard inner walls to gain more space. the gap is covered by an integral piece on the front eyebrows. i have 2 front eyebrows i intend to cut up so they fit behind the wing and fill the gap. i got them off a mate for free who has fitted flexi arches. i just need to get round to doing it, the only problem i can see is i cant work out how to fit the plastic to the outer wing, as if it just attaches to the inner, it may rattle? i suppose it will just have to be a tight fit to the inside of the outer wing, as the shape where the wheelarch is is different so you cant just fix it to the lip on the outer arch. ill get round to it someday but the inners are keeping the crud away from my footwells for now Quote Link to comment Share on other sites More sharing options...
ejparrott Posted April 5, 2012 Author Share Posted April 5, 2012 ah see, there's a 3" gap round the side, right in line with the tyre, so the crud still gets thrown up and down the side of the footwell! Quote Link to comment Share on other sites More sharing options...
ejparrott Posted April 6, 2012 Author Share Posted April 6, 2012 At £25+VAT, I think I'll wait until I find an old one....too much to spend just to make a trial cut-it-up!! Quote Link to comment Share on other sites More sharing options...
discomikey Posted April 7, 2012 Share Posted April 7, 2012 the crud does go up the side of the bulkhead but also gets washed out well for now until i get round to fitting the bits from the eyebrows Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.