jameshub Posted March 10, 2013 Share Posted March 10, 2013 any comments on the best for Defender? i'd never heard of Dinitrol but read a post and wondered what people thought Quote Link to comment Share on other sites More sharing options...
need4speed Posted March 10, 2013 Share Posted March 10, 2013 Neither. I prefer 3M schutz. Quote Link to comment Share on other sites More sharing options...
mikec Posted March 17, 2013 Share Posted March 17, 2013 I used dinitrol cavity wax on my new bulkhead seems ok. I asked on here I think and there was a lot of differing opinions but I think dinitrol came up most Quote Link to comment Share on other sites More sharing options...
Snagger Posted April 5, 2013 Share Posted April 5, 2013 The DIY waxoil sold in Halfords and the like is good for cavities but useless on the chassis' exterior - it's too soft. DIY applicators are rubbish, too. It's wroth stumping up the extra money and getting it done properly by a specialist - they have the high pressure steam lances needed to get the carp and loose rust off, the lifts to get the car up to do that properly, and the professional grade waxes that will last underneath the vehicle on salty British roads. You also don't have to contend with all the mess yourself. As for the quality of Dinitrol, it's what Boeing use, and it comes in many different grades for use in specific areas and conditions, unlike the single grade Waxoil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.