skauldy Posted November 1, 2013 Share Posted November 1, 2013 Has anyone rebuilt there LT230 box and just re used the large callopsable washer. Quote Link to comment Share on other sites More sharing options...
mickeyw Posted November 4, 2013 Share Posted November 4, 2013 If you are referring to the collapsible sleeve on the centre shaft, they are collapsible for a reason. You should always fit a new one if you have rebuilt the box. The idea is that you tighten the nut on the back, until a certain torque is achieved to turn the shaft. As the nut is tightened the sleeve collapses. I believe on later models, or even some rebuild kits, this part has been replaced by a fixed length spacer. Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 4, 2013 Author Share Posted November 4, 2013 Hi Mickey I have a suffix G box and the spacer looks fine no distortion in anyway. Sorta wondering after examining it would it be ok to reuse. Rather then buy the expensive rebuild kit. Quote Link to comment Share on other sites More sharing options...
eddyoz Posted November 5, 2013 Share Posted November 5, 2013 You can buy the spacer separately part FRC7437 cheap enough.Make sure you renew the 'o' ring. Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 5, 2013 Author Share Posted November 5, 2013 Great thanks Eddie. Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 5, 2013 Author Share Posted November 5, 2013 Eddie where did you get the part number. Looking for a few other bit also for the R380 Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 5, 2013 Author Share Posted November 5, 2013 Done a bit more reading. My box is a disco 2 which is a LT230SE it comes with a non collapsible spacer on the intermediate shaft. Quote Link to comment Share on other sites More sharing options...
eddyoz Posted November 6, 2013 Share Posted November 6, 2013 Skauldy.Use this site for parts id http://lrparts.net.ru/ click on English then Spare parts catalogue. Quote Link to comment Share on other sites More sharing options...
skauldy Posted November 6, 2013 Author Share Posted November 6, 2013 Skauldy.Use this site for parts id http://lrparts.net.ru/ click on English then Spare parts catalogue. Thanks Eddie. Seems it would be much easier setting preload if it had to been a collapsible spacer type. Few more bits to find so this will be a great resource. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.