need4speed Posted March 6, 2014 Share Posted March 6, 2014 Got the majority of the EDIS wired up tonight. Only thing ive still to do is the VR sensor. This is obviously shielded, with the shield connecting to pin 7. Is it just a simple matter of baring back the outer cable sheath, unravelling the shield and connecting it directly to pin 7? Quote Link to comment Share on other sites More sharing options...
Quagmire Posted March 6, 2014 Share Posted March 6, 2014 Sounds about right, just make sure you only connect the shielding at one end - leave the shielding at the sensor end unexposed. Quote Link to comment Share on other sites More sharing options...
need4speed Posted March 6, 2014 Author Share Posted March 6, 2014 Thanks Quagmire. Thats what i suspected but just wanted someone to confirm Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted March 7, 2014 Share Posted March 7, 2014 Yup, exactly as above ^^ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.