bushwhacker Posted December 11, 2014 Share Posted December 11, 2014 Hello out there. My speedo is acting weird needle bouncing all over the place. A new gauge is expensive. Big SO, is there any other options like using another gauge from something eles or maybe a gps type. I'm using the sat nav at the minute. I suppose I'll have to start saving. I had hoped to do a 200tdi cconversion as a next on the list to do. O well Quote Link to comment Share on other sites More sharing options...
ejparrott Posted December 11, 2014 Share Posted December 11, 2014 There is a thread in the tech archive about wobbly speedo's. You may find you're lucky and just need a few cheap parts Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted December 11, 2014 Share Posted December 11, 2014 If the speedo is actually on it's way out there are a few people on the forum who are upgrading their speedos to the TD5 type at the moment and may be willing to sell you their old ones, failing that you could do the TD5 speedo upgrade (with a second hand speedo head) although that can be a bit more expensive but still cheaper than a new clockwork speedo. Quote Link to comment Share on other sites More sharing options...
miketomcat Posted December 12, 2014 Share Posted December 12, 2014 It's more likely the Speedo cable is knackered. As it does it quite often balloons or frays thus becoming stop start as it spins this gives a bouncing Speedo needle. Mike 1 Quote Link to comment Share on other sites More sharing options...
bushwhacker Posted December 12, 2014 Author Share Posted December 12, 2014 Thanks. Seen the threads good info for me. Not fussed on the td5 conversion right now, maybe later? The first thing I changed was the cable thinking easy fix but when I took the old one off it was ok. Stuck the new one anyway. I think I will have to crawl under it on Sat. Quote Link to comment Share on other sites More sharing options...
miketomcat Posted December 12, 2014 Share Posted December 12, 2014 The other thing it could be is a partly striped Speedo drive it the transfer box. An easy way the check the Speedo it's self is put an oval nail that fits the square drive in the back of the Speedo into a battery drill. Insert it into the square drive and spin it up at a set speed if it still bounces the Speedo is shot it not the problem Is else where. Mike 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.