mmgemini Posted December 18, 2014 Share Posted December 18, 2014 I have a Record Power DML 24 X wood turning lathe. For some small stuff, Less than 12mm dia and 12mm long I use a normal Jacobs type chuck in the headstock. This is too large IMO. Now I would like to be able to use a smaller chuck, maybe a 6mm one, Does anybody know where I can get a Morse taper to do that ? Thanks Quote Link to comment Share on other sites More sharing options...
ejparrott Posted December 18, 2014 Share Posted December 18, 2014 This sort of thing? http://www.rdgtools.co.uk/acatalog/1MT_key-type_Drill_Chucks.html Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted December 18, 2014 Share Posted December 18, 2014 Are these too big? http://www.toolpost.co.uk/pages/Chucks___Accessories/MicroChucks/microchucks.html#MM50 Quote Link to comment Share on other sites More sharing options...
pete3000 Posted December 18, 2014 Share Posted December 18, 2014 http://www.arceurotrade.co.uk/Catalogue/Machines-Accessories/Lathe-Accessories/Tailstock-Accessories 1/2 way down, micro drill adaptor Quote Link to comment Share on other sites More sharing options...
mmgemini Posted December 18, 2014 Author Share Posted December 18, 2014 This sort of thing? http://www.rdgtools.co.uk/acatalog/1MT_key-type_Drill_Chucks.html Yep that's what I'm looking for. Thank you. Quote Link to comment Share on other sites More sharing options...
mmgemini Posted December 20, 2014 Author Share Posted December 20, 2014 This sort of thing? http://www.rdgtools.co.uk/acatalog/1MT_key-type_Drill_Chucks.html Now that is what I call Service. I ordered the 6mm chuck yesterday afternoon. It's through my letterbox today. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.