need4speed Posted January 22, 2015 Share Posted January 22, 2015 I seem to remember an old thread where someone fabricated their own rear bumperettes/corner protectors and included measurements etc on here. Cant for the life of me find that thread. Im 99% it was this forum. Does someone with a better memory than me recall who it was? Im pretty sure it was a well known member. Quote Link to comment Share on other sites More sharing options...
need4speed Posted January 23, 2015 Author Share Posted January 23, 2015 I presume its noone from this forum then...... Bugger i wish i could remember where i saw that thread. Quote Link to comment Share on other sites More sharing options...
David Sparkes Posted January 23, 2015 Share Posted January 23, 2015 You specify a recollection of measurements, and corner protection, so it won't be these from Mill Services I include them only because they have a 'home-made' look about them :-) Good Luck. Quote Link to comment Share on other sites More sharing options...
Paul Woodward Posted January 24, 2015 Share Posted January 24, 2015 I made my own. There weren't any dimensions though? Quote Link to comment Share on other sites More sharing options...
bodumatau Posted January 25, 2015 Share Posted January 25, 2015 If you want your bumperettes to work hard don't forget to "tube" the inside of the rear chassis box when you put your bolts thru. Otherwise it will just compress and your bumperettes will be forever loose. Simply measure the inside of the box at the bolt points (simple enough to measure with a vernier) then take a few mm off so you don't struggle to get them in, 20mm sqr tube does the job fine. Land rovers solution of putting a few load spreading plates on the nut side only works if whatever is mounted is deco only... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.