ianpittas Posted April 6, 2015 Share Posted April 6, 2015 hi , just a quick question What can I get apart from the piece of cardboard I have in it , to stop the rear window rattling around , it's doing my head in ! Thanks Ian . Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted April 6, 2015 Share Posted April 6, 2015 I have just re channelled mine. However I'm yet to test it as the truck isn't on the road yet. . Quote Link to comment Share on other sites More sharing options...
BogMonster Posted April 6, 2015 Share Posted April 6, 2015 On the Def 110SW sliding rear side windows a permanent anti rattle cure is to open the window, put some silicone sealant in the vertical channel on the 'open' end, shut the window into the sealant, and then force the two panes of glass apart with a little wooden wedge and fill up between the two panes of glass with silicone too, leaving it to set for 24hrs before pulling out the wedge. Never fails to cure a rattle, window won't open afterwards but nobody ever uses them anyway so not a problem! Quote Link to comment Share on other sites More sharing options...
Shutler1 Posted April 7, 2015 Share Posted April 7, 2015 Mine was rattling, i siliconed it shut, waited for it to dry and then ran a stanley blade around the egde, window doesnt rattle anymore and still opens. Hope that helps. Quote Link to comment Share on other sites More sharing options...
muddy Posted April 8, 2015 Share Posted April 8, 2015 I have a mini rubber door wedge. Quote Link to comment Share on other sites More sharing options...
cookie64 Posted April 8, 2015 Share Posted April 8, 2015 I silicone mine shut too then replaced it when a brand new one came up cheap on ebay Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.