Ghazaareeyeltzin Posted October 17, 2015 Share Posted October 17, 2015 I just bought dèfender 2 yrs ago. I'm not familiar with this machine, 2 days ago I went try my landy on offroad. But while I climb 45degree slope,sudennly my wheel running with rear wheel only.my difflock hardly to engaged.my friend help me.When back on the road .I change my gear to high range but my landy gone free and cannot move.so I set low gear also failed to move.when I push difflock to left ànd my landy start to move with 'tuck.tuck sound. so I went home using low range gear with difflock on. Im confuse what was gone wrong. I need an advice what is the problem happened to my landy. Quote Link to comment Share on other sites More sharing options...
western Posted October 17, 2015 Share Posted October 17, 2015 possible one or more of the drive members in centre of the wheels has stripped the splines, if one has stripped then with diff lock off the vehicle will not drive. Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted October 17, 2015 Share Posted October 17, 2015 Or you have broken a half shaft. Mo Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted October 18, 2015 Share Posted October 18, 2015 Something is wrong within the front axle. .... did you retry it in hi range with diff lock engaged? ? Quote Link to comment Share on other sites More sharing options...
Ghazaareeyeltzin Posted October 30, 2015 Author Share Posted October 30, 2015 Thanks guys.so what should I do.Do I have to replace anything.I'm not trying to move with hi range gear yet.because I'm afraid someting worst could happen.So I try to get some advice first before I make a next move. Quote Link to comment Share on other sites More sharing options...
Ghazaareeyeltzin Posted October 30, 2015 Author Share Posted October 30, 2015 Is it adviseable to drive my landy to workshop or should I call for tow truck. Quote Link to comment Share on other sites More sharing options...
Happyoldgit Posted October 30, 2015 Share Posted October 30, 2015 Just a reminder that the long standing LR4x4 policy is that posts by newly registered members have to be approved by our A&M team before showin on the forum. Basically this means that your post is unlikely to show on the forum straight away. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.