greenstream Posted October 25, 2015 Share Posted October 25, 2015 Where do you buy quallity outriggers. Last Ones th at I got, was 4-5 mm. To short ? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted October 25, 2015 Share Posted October 25, 2015 If YRM do them, they will be a good shout. Quote Link to comment Share on other sites More sharing options...
greenstream Posted October 25, 2015 Author Share Posted October 25, 2015 That would be great, but for some reason they dont. Quote Link to comment Share on other sites More sharing options...
wanger Posted October 26, 2015 Share Posted October 26, 2015 remember LR tolerances! 4-5mm is good. i've just done a pair, bought from the cheapest place on ebay and they fitted fine. Leave the g /box X member in and re use the bukhead to line it all up. Had to re plate the chassis under the outriggers as that was rotted out well. Quote Link to comment Share on other sites More sharing options...
Team Idris Posted October 26, 2015 Share Posted October 26, 2015 I'll be straight up honest here and say you can shim the crossmember under the gearbox to change the position of the outriggers. Those crossmembers vary on production tolernce, as does the chassis rail width. I'd buy cheap and mod it. The best you can buy is a knock down kit. I managed to get an S1 dumb iron in bits and it was easy peasy to make it fit. It's a shame its not how they all are. Lazer has got so cheap I'm into drawing bits on CAD and getting them made. I can then choose where it joins and how. It's the only option for the transit chassis as it is 24 year old. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.