mcc1979ian Posted August 7, 2016 Share Posted August 7, 2016 Ok so today I went to take the 90 a spin after a new set of discs and pads and she jumped out of high range. Got it back in but barely got moving and it jumped out again. Drove the 1/4ml home in low range no probs but it just refuses to stay in high. Iv tried rocking it whilst selecting high but still didn't help. The lever just dosent feel like it's fully locating. Could it be I just need to adjust something or does it sound more serious? Cheers Quote Link to comment Share on other sites More sharing options...
miketomcat Posted August 7, 2016 Share Posted August 7, 2016 I'd try adjusting it first like you say it sounds like it's not fully engaging. Mike Quote Link to comment Share on other sites More sharing options...
ejparrott Posted August 8, 2016 Share Posted August 8, 2016 Been offroading recently? Got a stone stuck up there? Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted August 8, 2016 Author Share Posted August 8, 2016 Had it to the petrol station and back last weekend it was fine then. To be honest iv not really got it on the road yet. Got a few wee issues to sort before MOT like lack of indicators, no fog light and bit welding on crossmember. Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted August 13, 2016 Author Share Posted August 13, 2016 Bit of adjustment and all is well. Cheers chaps 1 Quote Link to comment Share on other sites More sharing options...
gerrymc123 Posted August 13, 2016 Share Posted August 13, 2016 Bit of adjustment and all is well. Cheers chaps What did you adjust to rectify it? Quote Link to comment Share on other sites More sharing options...
mcc1979ian Posted August 14, 2016 Author Share Posted August 14, 2016 The link rod from the transfer box to the small lever. 2 x 13mm nuts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.