paime
-
Posts
613 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by paime
-
-
Is it an easy job? I've read getting the arm off can be a bit tricky.
-
Not sure what to do here. Do I risk it and buy a refurb unit? I can't justify a £1k adwest unit so that's out the picture. Do I try to refurb my own? Seems a challenge for someone like myself who is a little more on the agricultural side when to engineering skills.
-
12 hours ago, Stellaghost said:
No I would say traditional Defenders have become the new cash cow for suppliers, just look at what they sell for, you could have predicted the part supply chain would want their cut regards Stephen
Sadly I think you're right. The cost of those aluminium hinges is something else which annoys me greatly.
-
Is it simple economics or material prices increasing, I wonder. You see it quite a lot these days with other items like body cappings, bulkheads and doors. It's becoming prohibitively expensive unfortunately.
-
On 1/17/2017 at 7:33 PM, simonb said:
A quick trawl of the web seems to show they are back ordered with many suppliers or silly prices - £1000!
Paddocks has Adwest ones with drop arm for £450.
http://www.paddockspares.com/ntc1580nor-rhd-4-bolt-pas-box-complete-with-bent-drop-arm-outright.html
I'm on the hunt for a new steering box just now and came across this post. Click the Paddock Spares link above for a sad lesson in Defender parts price inflation
-
3 hours ago, reb78 said:
Looks a tidy job!
(Is it just the photo or is that brake pipe quite flat on the U shaped bend?!)
Just the photo thankfully! If you zoom in you can see the inner edge of the brake line.
-
I nervously started work this morning. The first challenge was getting access to the threads with the drill. Had to bite the bullet and take the disc off to get at it from the other side which was a touch annoying. After that it was almost plain sailing. On my first attempt getting the helicoil in I put too much pressure on it and it jumped some threads. On my second attempt I let it guide its own way in and all was well. I'm amazed by how much grip it has now and even more amazed that everything seemed to work fine! Also had to Macgiver a tool for the tap as my one wasn't big enough.
-
3
-
-
Aha! I have one of those at work which will be borrowed tonight...
-
1
-
-
Really daft question time.....but do i put the tap in a drill or hand tool thing...?
-
The bits and pieces arrived tonight and you were correct, @Bowie69 it was a 1.25mm thread. Tomorrow I'll give the helicoil set a bash. I've never tapped or died anything before so I'm intrigued as to how easy/hard it's going to be.
-
M12 x 1.25mm and a set of thread gauges purchased! I've got a funny feeling I'm going to have to remove the steering bar to get at it properly but hopefully not. Will post pics when I get round to doing the job. Thanks folks!
-
Sorry guys, still getting my head round the thread sizes here. Is the below bolt likely to be 1.25, 1.5 or 1.75mm? There seem to be quite a few options for M12 helicoil kits so want to make sure i'm getting the right one.
![20210531_164630[1].jpg](//content.invisioncic.com/r226025/monthly_2021_05/381111192_20210531_1646301.thumb.jpg.6a72fa5874ba7de1f0b6173ea4c9f7b2.jpg)
-
I went for Bilt Hamber Etch primer followed by their epoxy coating. I also used their cavity wax from a rattle can (which is very good) and then to town with brush on Waxoyl as well. One big mistake i made was not being thorough enough with cleaning the chassis before i started and i've got some bits flaking off now.
-
14 minutes ago, landroversforever said:
Are you trying a 'normal' bolt in it or the matching fine pitch? If its a standard pitch bolt they can be a little under diameter and feel like nothing is engaging.
It is a 'normal' caliper bolt but the first time it went in everything was fine and i managed to torque it up no bother. I had a similar issue on another swivel housing so i'm starting to think they're made of cheese! I'm going to triple check i'm using an M12 rather than M10 bolt tonight before stumping for a helicoil kit.
-
It's quite difficult to get a decent angle on it but here are a couple of shots. Really difficult to tell if the threads are duff the whole way through but when i put a new bolt in it barely got any grip at all so i'm guessing it's completely knackered.
Edit: I've just realised it's M12, not M10 https://www.lrworkshop.com/parts/SYP500090
-
4 hours ago, Bowie69 said:
You drill it out to suit the next size up, and put the insert in that brings it down to the original size
Do check the thread pitch, feels like they may be metric fine... but don't quote me on it.
Would this be the right one then? https://www.chronos.ltd.uk/product/m10-x-1-25-thread-repair-kit/
There's also a 1.5mm kit but not sure which one to get.
-
When I eventually made it home I tried a new caliper bolt and it didn't catch any thread at all. It's very strange as I had managed to torque it fine when I put the brakes on 6 months ago or so and I'm not sure how it managed to strip the threads then fall out.
Do I get the same size helicoil kit (M10) or does the insert drop it down a few sizes so I'll need an M8 bolt?
-
After driving about 100 miles on rough forest tracks last week my lower OSF caliper bolt rattled itself out and fell off leaving me with a loose caliper and a bit of a problem! I need to fix it permanently somehow but i don't want to get a hole new swivel assembly. Can i get away with using a helicoil insert and, if so, is M10 the right size? Any hints or tips with using them?
-
That'll make a cracking project! What turned itself into a missile in the transfer case?
-
A garden tractor?
-
I can't decide whether to guess now or wait until 7pm tonight!
-
The rear door opening the wrong way round is what's most confusing but I suppose that makes sense of it's being used on the other side of the road.
-
-
Having had the unpleasant experience of dropping a TD5 fuel tank i would opt for cutting a hole in the floor personally. If you've got a mat in the back you'll never even know there's a hatch there. It's also much easier to disconnect the fuel lines from up top and just lift the pump out.
![20210531_164630[1].jpg](http://content.invisioncic.com/r226025/monthly_2021_05/1993564740_20210531_1646301.jpg.b9d93980c441060fd3663294abbd3bf1.jpg)
The EBay Christ I fancy that 4x4 + its cheap thread
in International Forum
Posted
You could do so much with something like this and it would be a fantastic project. It would sell at a premium i think with the increase in staycation/camping holidays etc