Jump to content

Gluv

Settled In
  • Posts

    74
  • Joined

  • Last visited

Everything posted by Gluv

  1. I've always been led to believe Salisbury axles are the strongest fitted to Land rovers but I can recall reading that during the Wolf trials Salisbury axles kept breaking. P38 axles were used instead as they were less problematic apparently. Does anybody have any information on this ? Gluv
  2. That's very generous of you but I'm probably going to make one Thanks for the offer πŸ‘πŸ™‚
  3. Thanks for the reply . I have already been given that picture so am all sorted ,just got to get one knocked up Thanks again Gluv
  4. Hi Chaps Does anybody have a tool drawn up for bracing the pulley to allow the crank bolt to be undone ? . I need to get on with a belt change many thanks Gluv
  5. If the pump is the same as a webbasto, try spraying some oil in either end and use an airline to keep blowing back and forth on each port. They just stick if unused. Took about 45 mins to get mine working.
  6. I have a winterised wolf with the thermotop pro fitted. I usually warm the engine through prior to starting in the winter months . The radiators in the back really kick some heat out. Mine just starts from a simple switch on the dash πŸ™‚ Gluv πŸ‡¬πŸ‡§
  7. Due to lack of space I just couldn't route a pipe back so decided to just have a collection pipe with a ball valve on the end. I just blanked the sump return opening with a steel plate Gluv πŸ‡¬πŸ‡§
  8. I've mounted the provent on a bracket that fixes to the extra alternator mount . I also had to make a 45 degree adaptor for the rocker cover so the pipe could clear the air filter . It's proper cramped under the bonnet due to being a winterised/ waterproof vehicle . Pics below hopefully explain the installation. Gluv πŸ‡¬πŸ‡§
  9. After doing about 150 miles since installing the Pro vent I have drained it today and got about one and a half table spoons of oil from it . I must say I was quite surprised as my engine has only done 24000 . However given that the original tdi vent used to drain back to sump maybe this isn't too bad .If I remove the filler cap whilst running I don't really see any vapour. So in my experience the provent seems to be doing it job GluvπŸ‡¬πŸ‡§
  10. I've just fitted one of these . I have only driven about fifty miles with it so far but it's got oil in it . Bloody tight fit under my bonnet though ( winterised/ waterproof Wolf 90 ) Gluv πŸ‡¬πŸ‡§
  11. I always give fellow Defender and series drives the full Hitler salute when passing πŸ™‚ Gluv πŸ‡¬πŸ‡§
  12. Cheers! As it happens, I've found one for sale πŸ™‚
  13. Thanks for the reply Its the PLUG that I need , that plugs into the back of the tow vehicle Gluv
  14. Hi Chaps has anybody got a twelve pin trailer plug kicking about that they want rid of ? GluvπŸ‡¬πŸ‡§
  15. I do believe I have managed to find all the parts . Thanks to all who have replied Gluv
  16. Hi,

    can you send me some payment details for the hand throttle parts ?Β 

    ThanksΒ 

    Chris

  17. Hi , I will have all of that off you , thanks. pm me your payment details Gluv πŸ‡¬πŸ‡§πŸ‡¬πŸ‡§
  18. Let me know what you have πŸ‘πŸ™‚
  19. Now if anybody can turn up all those bits , I will be a happy man 😎
  20. I have the wolf parts manual so have all the proper numbers but searching on the net has turned up nothing. I was told at craddocks that military parts are now only available to military customers. I don't know how true that is . Gluv
  21. Pretty much the same for the 300 tdi Mike. There seems to be plenty of cables about but not the rest of it πŸ™
  22. Hi Does anybody know where I could find the complete hand throttle kit for the 300 tdi defender ? I'm struggling to find anything! cheers Gluv
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy