tpk241

I am definately interested ... any places left ?

Hi all, For anyone in the Salisbury plain area me and a few mates were up there on sunday 26th Nov and the mud was excellent. All this rain has really filled up the holes and we all got lots of water in our footwells ... The land warden was around for a chat and kept us up to date and whats allowed at the mo ... Anyone else venture up their this weekend ? We started of at westbury white horse and followed byways a fair way in ... TPK

Had my fuel pump tweaked and you wouldn't want to stand behing my exhaust for long i can assure you ... need to have another play cos it smokes like a beast too

Sorry if i misinformed ... must be an earlt 300tdi pipe then ?

Got a non-cat downpipe from allisport .. £55 + vat .. From a 200TDI i believe .. TPK

This is my next mod as well .. my steering at the moment is vague to say the least .. Sumobars website has a bolt on kit now with their bars i believe .. Anyone got this ?

Where did you get the Clocked swivels and bodylift from damoace ? Thanks TPK

Thanks for the warning ... Rear pads only replaced a little while ago (6 months ish) ... I knew that one bolts had gone as the head wasn't there when i bought the truck ... the other sheared whilst i was undoing it ... Used a stud extractor to remove one but the other was stuck right in there ... Put it all back together and siliconed the vacant bolthole up until i can get a new hub from somewhere or remove the remaining stud ...

Your right ... Took out the half shafts and found the Drivers side was full of rusty milky greasy stuff and that 2 of my half shaft flange bolts had sheared ... Replaced and back to the regular noises !! Thanks all

Thanks guys ... Wheel bearing i will check then .... as the rubber doughnut looks ok, no visible cracks or owt ... cheers TPK

Hi Guys, Hello to all .. my first query !!! I've developed a rear whiney noise with a dry grindy sound to accompany it Confused, heres the breakdown:- Disco 300 TDI Commercial with OME HD Lift of about 2.5" - 3", Springs: 764's and 763's, rear cranked arms from equippe, 33x12.50x15 BFG muds. Sits quite high cos i have stripped the rear seating and carpets. Its had a rotoflex for the duration of the lift (6 months). I have jumped in the back and got the missus to drive the truck, holding me ear to the floor panel It sounds like the rear diff. • Noise stronger on accel and when Cornering (left hand down louder) • Reduction in noise whilst braking • Noise still there when rear prop removed • Checked a little bit of the diff oil without draining and looks like new • No obvious play in wheel bearings or swivels when jacked and checked From what i have searched on the net it sounds like pinion bearings or grooved crown wheel ? I have a UJ to UJ prop which i will be fitting when i get to the bottom of the problems above. Please help confirm my suspicions or advise on next steps of diagnosis .. Thanks TPK