Gazzar Posted October 21, 2017 Share Posted October 21, 2017 Does anyone have a series 3 lightweight chassis? Can they see if they have this bracket on the chassis rail? But intact? Any chance of a photo? Quote Link to comment Share on other sites More sharing options...
Snagger Posted October 21, 2017 Share Posted October 21, 2017 I don't remember seeing one on my 1980 Lightweight. Quote Link to comment Share on other sites More sharing options...
steve b Posted October 21, 2017 Share Posted October 21, 2017 That's the remains of the hand brake pivot mount I think Steve b Quote Link to comment Share on other sites More sharing options...
Snagger Posted October 21, 2017 Share Posted October 21, 2017 1 minute ago, steve b said: That's the remains of the hand brake pivot mount I think Steve b It's about the right place. Can't remember if mine was just on the inboard face or was around the lower side like that. If that chassis has been used with a different transmission, as the bell housing cross member suggests, then it's a likely explanation that the bracket was removed and a non-standard lever used, such as a Discovery lever and cable. Quote Link to comment Share on other sites More sharing options...
Gazzar Posted October 21, 2017 Author Share Posted October 21, 2017 That's great, thanks chaps. I've borrowed the dimensions from a friends chassis, duplicate coming right up! G Quote Link to comment Share on other sites More sharing options...
Gazzar Posted October 21, 2017 Author Share Posted October 21, 2017 Right, won't be doing this straightaway as I'm going to finish the other rail first. But. It's drawn. Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.