MR-HIPPO Posted November 6, 2018 Share Posted November 6, 2018 On my Defender 200TDI engine, there is a bracket on the top rear of the rocker cover. Item 6 in the picture below. What would this bracket normally hold? Quote Link to comment Share on other sites More sharing options...
western Posted November 6, 2018 Share Posted November 6, 2018 That has the heater control cables & main & transfer gearbox breather pipes attached to it by the cable grip item 7 in one of the 2 holes. mine but using normal ty-wraps. Quote Link to comment Share on other sites More sharing options...
Ex Member Posted November 6, 2018 Share Posted November 6, 2018 (edited) There is a clamp that mounts there and secures the heater hoses for a left hand drive vehicle. See attached, item 14, BTR988 in addition to the cable clip. Edited November 6, 2018 by Red90 Quote Link to comment Share on other sites More sharing options...
MR-HIPPO Posted November 6, 2018 Author Share Posted November 6, 2018 (edited) OOPS, seems I put my heater control cables in the wrong place (if there is such a thing on a Land Rover) My cables run along the bulkhead. I would never of guessed that they were attached to the engine. Thanks guys. Not at all important, but, every time I see the bracket on mine, I wonder what it is, and then promptly forget about it until the next time I look at my engine. Mine is RHD or: LHD Land Rovers are not proper Land Rovers and as such do not count 😊 Edited November 6, 2018 by MR-HIPPO Quote Link to comment Share on other sites More sharing options...
oneandtwo Posted November 6, 2018 Share Posted November 6, 2018 The cables are secured to the bulkhead on later defenders anyway Quote Link to comment Share on other sites More sharing options...
MR-HIPPO Posted November 7, 2018 Author Share Posted November 7, 2018 Thank you. As I suspected. No such thing as "the wrong place" on a Land Rover. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.