CJT1999 Posted February 8, 2021 Share Posted February 8, 2021 Got the 3 amigos on the dash and proceeded todo the little wire bypass but didn’t work for me still getting them two codes and they will not clear any help would be appropriated Quote Link to comment Share on other sites More sharing options...
Simon_CSK Posted February 10, 2021 Share Posted February 10, 2021 I only ever had problems with the ABS sensors. These can be checked with a multimeter. Quote Link to comment Share on other sites More sharing options...
JohnnoK Posted February 13, 2021 Share Posted February 13, 2021 My Disco had the 3 Amigos in permanent residence when I bought it, and my Nanocom told me it was a wheel sensor, which was replaced, only for them to reappear. It was the need to replace my battery that cured them, at the end. I made up a new earth cable and replaced both clamps as they were not in the best shape, and the Amigos disappeared. Quote Link to comment Share on other sites More sharing options...
sierrafery Posted February 20, 2021 Share Posted February 20, 2021 (edited) Maybe it's late reply but did you cut the switch wires and prolonged them out or you spliced into the circuit like in some tutorials ? also did you measure the resistances of the switch pack ? Edited February 20, 2021 by sierrafery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.