bushwhacker Posted February 4, 2023 Share Posted February 4, 2023 Me again, can anyone tell me if the above will have the fixings/brackets on the C posts for middle row seatbelts? I know I don't have anything brackets on the chassis or inside. I am thinking I will run into complications if I try to fit some? Done about 10 pages searching but nothing relevant to the older 110s. Regards Mark. Quote Link to comment Share on other sites More sharing options...
Eightpot Posted February 4, 2023 Share Posted February 4, 2023 The 1986 brochure shows third row seatbelts, may have been an option but I'd hsve thought the c pillar brackets would be there - easy to spot if you pull the trim forward a bit. Quote Link to comment Share on other sites More sharing options...
miketomcat Posted February 4, 2023 Share Posted February 4, 2023 It is possible to retro fit C post seat belt mounts. I had to in our 1983 110 from memory the mounts can out of a 94 ish. Mike Quote Link to comment Share on other sites More sharing options...
western Posted February 4, 2023 Share Posted February 4, 2023 There is 2nd row seatbelt attachments & fitting info in the upto 1986 110 parts book, But only for Static belts, so the parts are or have been available. Quote Link to comment Share on other sites More sharing options...
bushwhacker Posted February 4, 2023 Author Share Posted February 4, 2023 My 110 was early January 86 reg C, no belts at all when I got it 19 years ago. Another one of my ideas shelved. Thanks guys. Quote Link to comment Share on other sites More sharing options...
western Posted February 4, 2023 Share Posted February 4, 2023 The parts above can be retrofitted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.