ped Posted April 26, 2023 Share Posted April 26, 2023 The donor engine for my 110 was from a disco auto and it was supposed to have the pump and injectors swapped to non auto ones They didn't do this will i have any issues with the injector with the wire if i just leave it Quote Link to comment Share on other sites More sharing options...
pat_pending Posted April 26, 2023 Share Posted April 26, 2023 If it still has the EDC pump fitted it will need it's ECU and wiring. If it has a standard non EDC pump, then the injector is fine as it is. 1 Quote Link to comment Share on other sites More sharing options...
Snagger Posted April 27, 2023 Share Posted April 27, 2023 Are you certain that the injectors differ? I don’t know that they aren’t, but I can’t see any reason for them to. They do look like a service would be in order. Quote Link to comment Share on other sites More sharing options...
ped Posted April 27, 2023 Author Share Posted April 27, 2023 i read the pressures were different but 300's are new to me the pump has the throttle pedal conection and afaik it was swapped out for the fly by wire one but i didn't notice which pump it had on when i first saw it only it was from an auto i have to go get the starter which they forgot to put on when they swapped everything over from the auto set up ,if the injectors are all the same i won't make a fuss about them not swapping them over 1 Quote Link to comment Share on other sites More sharing options...
hurbie Posted April 27, 2023 Share Posted April 27, 2023 as far as i know the only difference in the injector with the wire is a knock sensor built in .. Quote Link to comment Share on other sites More sharing options...
Mudmonkey Posted April 27, 2023 Share Posted April 27, 2023 Word on the internet is the pressures are different, when I removed the EDC from my 300 I did change the injectors but I've read of people running the EDC injectors with no problem and wire disconnected. 1 Quote Link to comment Share on other sites More sharing options...
ped Posted April 27, 2023 Author Share Posted April 27, 2023 in that case i'll leave as is for the time being Quote Link to comment Share on other sites More sharing options...
toenden Posted April 28, 2023 Share Posted April 28, 2023 I have two former edc engines that have been running with just disconnected wires for a decade. Might not be right, but most certanly works 🙂 -anybody in need of an edc pump? 🤣 /mads 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.