nickm Posted April 13, 2007 Share Posted April 13, 2007 Anyone know if theres a double waterpump pulley for a 200 tdi disco engine want to move my alternator to the other side of the engine and was thinking about fitting a double pulley on the water pump, does anyone see any probs with doing this ? i have the extra pulley that fits onto the plate in front the diesel pump (guessing for aircon) would it be better to work off that some how ? Cheers Nick Quote Link to comment Share on other sites More sharing options...
Les Henson Posted April 13, 2007 Share Posted April 13, 2007 Weld one to another perhaps. Not too sure if it's ok doing this as L/R water pumps tend to be a bit delicate anyway. Les. Quote Link to comment Share on other sites More sharing options...
Tonk Posted April 13, 2007 Share Posted April 13, 2007 can you not just run your alternator from the crank pulley, aircon models have extra groove on them Quote Link to comment Share on other sites More sharing options...
nickm Posted April 13, 2007 Author Share Posted April 13, 2007 can take the pulley off and weld another 1 onto it, wasnt sure if there would be any probs with the bearing in the pump from running somthing else on it my crank has the 2 v pulleys but using the back 1 looks astho it would be really close to rubbing on the casing (front 1 has the wather pump and power steering) Quote Link to comment Share on other sites More sharing options...
nickm Posted April 13, 2007 Author Share Posted April 13, 2007 can you not just run your alternator from the crank pulley, aircon models have extra groove on them has anyone got a pic of the aircon setup ? Quote Link to comment Share on other sites More sharing options...
western Posted April 13, 2007 Share Posted April 13, 2007 The 3 groove crank pulley LR part number ERC6859 is the best way to run another or a re-positioned alternator, it just bolts on in place of your existing pulley, rearmost grove is water pump/existing alt, centre groove for air condition pump, front groove for power steering pump. see pics of mine below. [note- no air cond on my 110] Quote Link to comment Share on other sites More sharing options...
Les Brock Posted April 14, 2007 Share Posted April 14, 2007 Mine HTH ? Quote Link to comment Share on other sites More sharing options...
nickm Posted April 14, 2007 Author Share Posted April 14, 2007 thats the extra pulley thing that i have looks astho it would be easier to use that and mounting bracket for the alt take it it doesnt really matter that the crank pulley has a bigger diameter than the power steering pulley ? Quote Link to comment Share on other sites More sharing options...
western Posted April 14, 2007 Share Posted April 14, 2007 that idler pulley is in the correct place for air con fitted vehicles, you'd be better off obtaining the 3 groove crank pulley run the alts belt from that via the idler as in the photo above, don't think the water pump would take to kindly to having to share it's pulley with another belt. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.