AJL Posted November 13, 2007 Share Posted November 13, 2007 ok i'm sure this has been done many times which is the best paint and prep method to tidy up my rear cross mermber? Quote Link to comment Share on other sites More sharing options...
BogMonster Posted November 13, 2007 Share Posted November 13, 2007 Forget hammerite as it is junk - I'd just treat with something like Kurust if required and then some aerosol or brush on satin black (nothing too shiny) as from what I have seen most people's attempts to spray it "properly" seem to fall off after a few months... Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted November 13, 2007 Share Posted November 13, 2007 Zinc phosphate primer seems to work well, you may need thinners to go with though. Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted November 13, 2007 Share Posted November 13, 2007 ^^^^ wot he says and black satin tractor paint on top Nige Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.